Tcp/Ip Interface (F5 Hex) - Toshiba TOSVERT VF-AS1 Series Function Manual

4.10. TCP/IP interface (F5 hex)

Class code 0xF5: The TCP/IP Interface Object provides the mechanism to configure a device's
TCP/IP network interface.
Class Attributes available
Instance Attribute ID Access
1
2
3
0
6
7
Instance 1 Attribute available
Instance Attribute ID Access
1 Get
2 Get
3 Get/Set
1
4 Get
5 Get/Set
6 Get/Set
Services
Service
Service Name
Code
01 hex Get_Attribute_All
02 hex Set_Attribute_All
0E hex Get_Attribute_Single
10 hex Set_Attribute_Single
Name
Get Revision
Get Max Instances
Get Number of Instances
Get Max ID of class attributes
Get Max ID of instance attribute UINT
Name Data type Details
Status DWORD
Configuration DWORD
capability
Configuration DWORD
control
Physical Link STRUCT
Object of
UINT
EPATH
Interface STRUCT
Configuration of
UDINT
UDINT
UDINT
UDINT
UDINT
STRING
Host Name STRING
Supported
Class
Yes
N/A
Yes
Yes
Data type Value
UINT 1
UINT 1
UINT 1
UINT 7
6
0 = The Interface Configuration attribute has not been
configured.
1 = The Interface Configuration attribute contains valid
configuration.
Bit 0 = 1 (TRUE) shall indicate the device is capable of
obtaining its network configuration via BOOTP.
Bit 1 = 1 (TRUE) shall indicate the device is capable of
resolving host names by querying a DNS server.
Bit 2 = 1 (TRUE) shall indicate the device is capable of
obtaining its network configuration via DHCP.
Bit 3 = 1 (TRUE) shall indicate the device is capable of
sending its host name in the DHCP request.
Bit 4 = 1 (TRUE) shall indicate the Interface Configuration
attribute is settable.
Bit 5-31 : reserved
Bits 0-3 Start-up configuration
0 = The device shall use the interface configuration values
previously stored.
1 = The device shall obtain its interface configuration values
via BOOTP.
2 = The device shall obtain its interface configuration values
via DHCP upon start-up.
3-15 = Reserved for future use.
Bit 4 = 1 (TRUE), the device shall resolve host names by
querying a DNS server.
Bit 5-31 : reserved
Path Size
Path: Logical segments identifying the physical link object
Example [20][F6][24][01] : [20] = 8 bit class segment type;
[F6] = Ethernet Link Object class; [24] = 8 bit instance
segment type; [01] = instance 1.
IP address (0 : no address configured)
Network Mask (0 : no Network mask configured)
Gateway address (0 : no address configured)
Name server address (0 : no address configured)
Name server address 2 (0 : no address configured)
Domain Name
Reads or writes the name of Drive.
Instance
Read all attributes
Yes
Write all attributes
Yes
Read one attribute
Yes
Write one attribute
Yes
- 33 -
E6581581
Description of Service