Satellite Radio Operation - Jensen MP6512i Installation And Operation Manual

MP6512i

SATELLITE RADIO OPERATION

Listeners can subscribe to XM
www.xmradio.com, or by calling (800) 967-2346. Customers should
have their Radio ID ready (see "Displaying the Identification (ID)
Code"). Customers can receive a limited number of free-to-air
channels without activation.
Listeners can subscribe to Sirius
www.sirius.com, or by calling (888) 539-SIRIUS. Customers should
have their Sirius ID ready (Sirius ID is located on the Satellite Radio
Tuner, sold separately). Customers can listen to music samples by
tuning to channel 184.
Accessing Satellite Radio Mode
To switch to Satellite Radio mode, press SRC (7) until "- - SAT - -" appears
on the display. This will not be displayed unless the unit is connected to an
optional XM or Sirius receiver.
MP6512i
Displaying the Identification (ID) Code
Before you listen to Satellite Radio, you must subscribe to the service using
your radio's identification number. To display the radio ID, press the TUNE/
TRACK |<< button (19) to access channel 000. The screen displays
"RADIO ID" followed by the ID number.
All manuals and user guides at all-guides.com
®
Radio on the Web by visiting
®
Radio on the Web by visiting
/
SAT
READY
Selecting a Station
Press the TUNE/TRACK >>| or |<< button (
station. Press and hold the TUNE/TRACK >
one second to fast forward or fast reverse t
Preset Stations
Press the BAND button (3) to change betwe
Each band stores up to six preset stations.
of 18 preset stations.
Store a Station
1. Select a band (if needed), then select a
2. Hold a preset button (14) for three seco
appears in the display.
Recall a Station
1. Select a band (if needed).
2. Press a preset button (14) to select the
Direct Tuning Mode
To enter a station directly, perform the follow
1. Press the AS button (15) once. "Direct"
2. Press the MENU button (22) to display
3. Turn the rotary encoder to select the thi
UNIVERSAL SERIAL BUS
(0-9).
4. Press MENU (22) to enter the number a
5. Turn the rotary encoder again to select
channel (0 - 9).
6. Press MENU to enter the second numb
7. Turn the rotary encoder again to select
want to tune to (0 - 2).
8. Press MENU to enter the final number a
NOTE: If the channel is unauthorized or i
on the LCD and the unit returns to the in
17