Image Rotation; Rotate Sort - Savin 3799 Operating Instructions Manual

Savin printer operating instructions
Hide thumbs Also See for 3799:
Table of Contents

Advertisement

Reception Features
❒ This feature is not available when
the Image Rotation function is
turned on. See p.122 "Image Rota-
tion".
❒ You can turn this feature on or off
with User Parameters. See p.178
"User Parameters" (switch 10 bit
1).
❒ This feature uses Memory Recep-
tion.

Image Rotation

4
If you have installed paper in the tray
sideways K, incoming fax messages
will be rotated automatically to fit on
the paper.
Note
❒ This feature is not available with
Polling Reception.
❒ You can turn this feature on or off
with User Parameters. See p.178
"User Parameters" (switch 10 bit
2).
❒ Two In One setting is disregarded
when this function is turned on.
See p.121 "Two In One".
❒ The document may be slightly re-
duced both vertically and horizon-
tally when printed out.
❒ You can choose to have received
messages printed from a specified
tray. See p.220 "Specified Tray".
122
your machine
❒ This feature uses Memory Recep-
tion.

Rotate Sort

W h e n b o t h 8
1
8
/
"×11"L copy paper is loaded, A4
2
size incoming faxes are delivered al-
ternating by message between K and
L directions.
Note
❒ Rotate Sort is available with the
following functions:
• Memory Reception
• Substitute Reception
• Confidential Reception
• Memory Lock Reception
• Lists and Reports
❒ This feature is not available with
Polling Reception.
❒ If the Specified Tray function is
turned on, output may not alter-
nate between K and L.
❒ Two In One output is not available.
GFKAIR0N
❒ If the incoming message is wider
1
than 8
/
1
or 8
/
"×11"L paper is loaded, this
2
feature is not available.
❒ When 11"×17" paper is loaded, if
you receive long documents of
1
8
/
" width, they are printed on
2
11"×17" size paper.
❒ Documents may not be printed
with A4 K after the machine exit-
ed from Energy Saver Standby
mode. See p.300 "Energy Saving".
❒ In order to use this function, Image
Rotation needs to be switched on
with User Parameters. See p.178
"User Parameters" (switch 10 bit
2).
" × 1 1 " K a n d
1
/
2
1
" and neither 8
/
"×11"K
2
2

Advertisement

Table of Contents
loading

Table of Contents