Table of Contents
Advertisement
Other Transmission Features
ID Transmission
If you use this feature, transmission is
limited to destination machines of the
same make and with the same stored
Polling ID. This is useful when send-
ing documents containing confiden-
tial or sensitive information.
Preparation
You need to program the Polling
3
ID beforehand. See p.199 "Regis-
tering ID Codes" .
Limitation
❒ ID Transmission is not available
with the following functions:
• Polling Transmission
See p.22 "Polling Transmis-
sion".
• Backup File Transmission
See p.102 "Backup File Trans-
mission" .
Note
❒ You can turn this feature on or off
with User Parameters. See p.178
"User Parameters" (switch 06 bit
2).
94
Duplex Original Settings
This feature lets you scan in each side
of a double-sided original, then have
both sides sent in a single operation.
Preparation
You need to store the Duplex Orig-
inal function in a User Function
key beforehand. See p.154 "User
Function Keys".
Limitation
❒ This feature is only available with
Memory Transmission.
❒ Document bypass tray is not avail-
able with this feature.
Note
❒ You cannot send duplex originals
using Parallel Memory Transmis-
sion.
A A A A
Make sure the Memory Transmis-
sion indicator is lit.
Note
❒ If it is not, press the { { { { Transmis-
sion Mode} } } } key.
B B B B
Press the User Function key ({ { { { F1} } } }
to { { { { F10} } } } ) with the Duplex Origi-
nal function stored in.
C C C C
Set the double-sided original
with the front page face-up.
Advertisement
Table of Contents
