Programming A User Function Key On The Job - Savin 3799 Operating Instructions Manual

Note
❒ To see a function number not
displayed on the display, press
[↑ ↑ ↑ ↑ Prev.] or [↓ ↓ ↓ ↓ Next].
❒ If another function is already
registered, press the { { { { Clear} } } } key
or the { { { { Stop} } } } key to delete it.
F F F F
Press [OK].
Note
❒ If you press [Cancel], the func-
tion is not stored and the dis-
play shown in step D appears
again.
❒ If you press another User Func-
tion key here, you can register
or edit another function by fol-
lowing the procedure described
above.
G G G G
Press [PrevMenu] twice.
H H H H
Press [Exit] to return to the stand-
by mode.
Programming a User Function Key on the
Job
When carrying out an operation from
the control panel, you can store the
various operations that you have per-
formed so far in a User Function key.
Once stored, just press that User
Function key when the standby dis-
play is shown to carry out those oper-
ations.
Note
❒ You cannot store the following op-
erations in User Function keys:
• User Function settings
• Quick Dial, Speed Dial, Group
Number, File No, Confidential
ID, Memory Lock ID, or Opera-
tions carried out after specify-
ing a User Code (SUB code).
The following example procedure de-
scribes how to store the time setting
for Send Later in User Function key
{ { { { F5} } } } .
A A A A
Press [Mode].
B B B B
Enter the code for "Send Later"
with the number keys.
C C C C
Press { { { { F5} } } } .
D D D D
Press [Yes].
{ { { { F5} } } } is registered and the display
showing the operation in progress
reappears.
User Function Keys
157
6