Toshiba T4900CT Manual page 52

Procedure 1 Hot Key Check
Brightness is changed by the following Hot keys. If the display is blank, go to Check 1. If
you cannot change the brightness, go to Check 3. If you cannot change the contrast, go to
Check 4.
Check 1 Pressing Fn+F5 selects the active display device. Each time you press Fn+F5, the
active display device changes in the following order: LCD: Dual Display, which
activates both LCD and CRT; and CRT.
If the display is still blank, go to Check 2.
Check 2 Pressing Fn+F1 sets the computer in the instant security mode. Once set in this
mode, the display becomes blank and the keyboard is locked to prevent others
from gaining access to your computer. To restore the computer from the instant
security mode, enter the instant password or turn the power off and back on.
Pressing the Fn+arrow key increases or decreases the brightness of color LCD
Check 3
panels.
Procedure 2 External CRT Check
Connect the external CRT to the T4900CT's external monitor port, then press Fn+F5.
If the external CRT works correctly, the internal LCD display may be damaged. Go to Proce-
dure 4.
If the external CRT appears to have the same problem as the internal LCD, the display con-
troller may be damaged. Go to Procedure 3.
T4900CT
Increases the brightness of the LCD panel.
Decreases the brightness of the LCD panel.
2-35