Table of Contents
Advertisement
4.20 FL Inverter Cable, Display Cable
Removing the Display Cable
To remove the T4900CT's display cable, follow the steps below and refer to figure 4-44.
1.
Turn off the power to the T4900CT. Disconnect the AC adapter, power cord, and
all external cables connected to the T4900CT.
2.
Remove the battery pack, top cover, display assembly, display mask, FL inverter
board, and TFT color LCD module as described in sections 4.2, 4.6, 4.10, 4.16,
4.17, and 4.21.
3.
Remove the three M2.5x6 screws securing the display hinge. Note the ground
cable.
4.
Remove the display hinge and the tape, then lift off the display cable.
T4900CT
Figure 4-44 Removing the display cables
4-49
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
