Installing the Status Indicator Panel
To install the T4900CT's status indicator panel, follow the steps below and refer to figure 4-
16.
1.
Connect the status indicator panel cable to the pressure plate connector (PJ8)
on the upper system board.
2.
Set the status indicator panel in the upper system board cover, making sure it is
seated securely in its brackets. Note that a fold is not built into the status indica-
tor panel cable. Let the cable bend naturally when you seat the panel; do not try
to fold the cable.
3.
Secure the status indicator panel cable with tape.
4.
Install the top cover, HDD pack, optional PCMCIA card, optional memory card,
and battery pack as described in sections 4.6 back through 4.2.
T4900CT
4-19