4.8
Status Indicator Panel
Removing the Status Indicator Panel
To remove the T4900CT's status indicator panel, follow the steps below and refer to figure 4-
16.
1.
Turn off the power to the T4900CT. Disconnect the AC adapter, power cord, and
all external cables connected to the T4900CT.
2.
Remove the battery pack, optional memory card, optional PCMCIA card, HDD
pack, and top cover as described in sections 4.2 through 4.6.
3.
Remove the tape securing the status indicator panel cable.
4.
Disconnect the status indicator panel cable from PJ8 on the upper system board
and lift the panel out of its brackets.
Figure 4-16 Removing the status indicator panel
4-18
T4900CT