Updating Your Bike Profile - Garmin EDGE 800 Owner's Manual

Settings
Updating Your Bike
Profile
You can customize three bike profiles.
The Edge uses the bike weight, the
odometer value, and the wheel size to
calculate accurate ride data.
1. Select MENU >
Settings > Bike Profiles.
2. Select a bike.
3. Select Bike Details.
4. Enter a name for the bike profile,
the bike weight, and the odometer
value.
5. If you are using a speed and
cadence sensor, select Wheel Size.
Select Automatic to calculate
•
your wheel size using GPS
distance.
• Select Custom to enter your
wheel size. For a table of wheel
sizes and circumferences, see
page 56.

> Bike
Training Settings
Marking Laps by Position
You can use Auto Lap
automatically mark the lap at a specific
position. This feature is helpful for
comparing your performance over
different parts of a ride (for example, a
long climb or training sprints). During
courses, use the By Position option to
trigger laps at all of the lap positions
saved in the course.
1. Select MENU >
Settings > Auto Lap > Auto Lap
Trigger.
2. Select By Position.
3. Select Lap At.
4. Select an option:
Select Lap Press Only to
•
trigger the lap counter each time
you press LAP and each time
you pass any of those locations
again.
Edge 800 Owner's Manual
to
®
> Bike