Siemens Desigo RXB Technical Manual page 377

Temperature display in
normal mode
Parameter
Standard display
No display
Setpoint
Room
temperature
Temperature display in
the case of a setpoint
shift
Parameter
Setpoint display
Relative
Absolute
Note
Siemens
Building Technologies
In room units with an LCD panel, it is also possible to select the temperature value
to be displayed.
(Normal mode = setpoint not shifted or setpoint shift canceled).
LCD display
Basic setting: Room temperature
(only room units with LCD).
Displays only the room operating mode and, if activated,
the heating or cooling symbol.
Effective temperature setpoint (average value from heating
and cooling setpoints) e.g. SpH = 21 °C and SpC = 24 °C.
Effective room temperature used as the input to the
controller (basic setting)
In room units with an LCD, it is possible to define what is to be displayed in the event of
a setpoint shift.
LCD display
(only room units with LCD).
Shift value e.g. +3.0K (basic setting)
Effective temperature setpoint, e.g. 23.0 °C
(Mean value between heating and cooling setpoint).
If "Absolute setpoint adjustment" is selected, the LCD panel displays a scale which
illustrates the adjustment as it happens:
10385Z20
To reset the setpoint shift, refer to page
RXB (KNX) application library
Room unit
135
.
FNC Description of functions for FC-10, FC-11, FC-12
HandyTool
*109
96
48
2
HandyTool
*110
0
4
141/166
CM110385en_05
28 Feb 2009