Function Select Mode - Omega DP606A User Manual

Section 5.7 - Function Select Mode
While in function select mode 1 is displayed in the Function Display and the
selected function is displayed in the Main display.
The DP606A/DP612A monitor has several different Functions listed in the table
below.
Function
0
1
2
3
4
5
6
7
8
9
A
B
C
D
F
Navigate Function Select Mode using the button below.
If the Password option is enabled only Functions 0 and 1 will be available. Entering
the correct password in Function 1 will unlock the rest of the menu options. If the
Password is disabled Function 1 will not be available.
Description
Return to Run Mode
Function Select / Enter Password
Set Active Zone
Set Low Alarms
Set High Alarms
Set Modbus Address
Set Scan Time
Set Model Options
Password Enable and Disable
Calibration
Set Alarm 1 Options
Set Alarm 2 Options
Set Low Scale
Set High Scale
Set Serial Options
Table 4 - Function Codes
Increments the Function Code displayed in the
Main display.
Enters the Function displayed in the Function
display.
5
Series Navigation
10