Lock Zones; Clear Alarms; Check Alarm Values; Function Select Mode - Omega DP606A User Manual

5
Series Navigation
Section 5.2 - Lock Zones
Symbol
Section 5.3 - Clear Alarms
Section 5.4 - Display Alarm Values
Section 5.5 - Function Select Mode
Section 5.6 - Reset Defaults
9
Description
The display stops cycling thru each display. The currently selected
zone information will be continuously updated on the display. Note
that all active zones continue to be read and any alarm conditions
will activate the enabled alarm relays.
The Lock option is released and the value display will cycle thru all
active zones.
Any active, latched alarm is cleared.
Displays the Alarm Value for the current zone and stops scanning.
The Main display shows the Alarm value. The Zone display shows
the zone.
Increments the Zone number and displays the next
Alarm Value.
Switches between HI and LO Alarm Values. The Function
display shows 3 when displaying Low values and 4 when
displaying High Values.
Return to Run Mode
Enter Function Select Mode from Run Mode
Hold all 3 buttons down for 5 seconds to reset unit to Factory
Defaults. The unit will reboot and return to Run Mode.