Setting The Key Lock Function (Basic Setting Mode) - Omega RD-MV100 Series User Manual

10.2 Setting the Key Lock Function (Basic Setting
Mode)
Procedure
10-2
Select whether or not to enable the key lock on the individual keys and the external
storage medium. The initial setting is [Free] (disabled) on all parameters.
• These procedures are carried out in the basic setting mode.
• Use the arrow keys to move the cursor (blue) to the appropriate parameter.
• The possible selections are displayed at the bottom of the screen. Select using the
soft keys.
• The parameter boxes that are changed are displayed in yellow. By confirming the
new settings, they change back to white.
Press MENU .
Press FUNC for 3 seconds. The menu screen for the basic setting mode appears.
Next 1/3
Press the soft key
To display the setting screen press the soft key
1
2
The numbers in front of the operating procedure shown below correspond to the
numbers in the above figure.
1. Use/Not
Select [Use] or [Not]. If [Use] is selected, various parameters are displayed.
[Use] : Use key lock.
[Not] : Do not use key lock.
2. Password
Set the password used to release the key lock in the operation mode.
Pressing the [Input] soft key displays a window used to enter a string. Enter the
string (up to 6 alphanumeric characters) and press the DISP/ENTER key. For
the procedures related to entering character strings, see "Entering Characters"
on page 3-22.
3. For each parameter, select whether or not to enable the key lock.
[Free] : Disable
[Lock] : Enable
Confirming operation
To confirm the new settings, press the DISP/ENTER key.
To cancel the new settings, press the ESC key. A window appears for you to confirm the
cancellation. Select [Yes] using the arrow keys and press the DISP/ENTER key.
.
#6
3
.