Alarm Search - Sanyo DSR - 300 Instruction Manual

Digital video recorder
Table of Contents

Advertisement

6
SEARCHING FOR RECORDED IMAGES

ALARM SEARCH

Lets you search and play back all the alarm images stored
in the alarm recording area. If pre-alarm images are being
recorded, playback will start from immediately before the
alarm.
[SEARCH] button
[
[ALARM] button
1
Press the [SEARCH] button while the
digital video recorder is recording or
stopped.
The <SEARCH> screen is displayed.
2
Check that "ALARM SEARCH" is
selected, and press the [ ] button.
The <ALARM SEARCH> screen is displayed.
(1) NO:
Displays the alarm number.
(2) DATE/TIME:
Displays the date/time at which the alarm was received
and the image recorded.
(3) TOTAL ALARMS:
Displays the total number of recorded alarm images.
(4) Preview screen:
Displays the selected alarm image.
] button
[
] button
[
] button
(1)
(3)
(2)
(4)
3
Press the [
the image to play back.
The selected alarm image is displayed in the preview
screen. You can display up to 8 alarm images.
To display the next (previous) image
Press the [
] or [
To display the items on the next page
Press the [ALARM] button. The next 8 items are
displayed chronologically.
To end search mode
Press the [SEARCH] button.
4
Press the [ ] button.
The selected image is
played back on the full
screen.
To display pre-alarm images
After starting playback of alarm images found using an
alarm search, press the [ ] button to activate reverse
playback.
Skipping can be carried out during playback
1
During playback, press the [ALARM]
button.
Playback will skip to the next earlier alarm image when
the
button is pressed.
Playback will skip to the next later alarm image when
the
button is pressed.
When playback is performed using an alarm search, the
image at the start and end of each alarm recording will
be paused.
Play the final alarm image using the [ALARM] button.
30
] or [
] button to select
] button.
05- 20- 04 ALARM 0003
01: 06: 00 EN
10FPS
English

Advertisement

Table of Contents
loading

Table of Contents