Table of Contents
Advertisement
SEARCHING FOR RECORDED IMAGES
Alarm search
All alarm recording images in the alarm recording area can be searched for and played back. If pre-alarm images have is recorded, the images
immediately before the alarms can also be played back.
Press the SEARCH FRAME/FIELD button during
1
recording or when the digital video recorder is stopped.
SEARCH
The SEARCH screen appears.
FRAME/FIELD
Use the jog dial to select ALARM SEARCH and then turn
2
the shuttle dial clockwise.
The ALARM SEARCH screen appears.
1
2
3
Use the jog dial to move the cursor in order to select the
3
images to be played back.
The selected alarm image appears in the preview screen.
Note:
Turn the shuttle dial clockwise.
4
The preview image appears in a single-screen display and playback starts.
Note:
Alarm search 2
Press an ALARM skip button during playback.
1
ALARM
Note: When playing back using alarm search, the playback will pause at the
NO: Alarm number appears.
DATE/TIME: The date and time that the alarm was received and the
images were recorded appears.
TOTAL ALARM: The total number of alarm images recorded appears.
Up to eight items of alarm information can be displayed on the ALARM
SEARCH screen. When the jog dial is turned, the previous or next alarm
information screen appears.
To end this search mode, press the SEARCH FRAME/FIELD button.
You can also use the shuttle dial or jog dial to carry out operations such
as pausing and fast-forward playback.
Alarm search starts playback from the image that was recorded at the
instant the alarm occurred, so if you are viewing pre-alarm images, use
the shuttle operations to carry out rewind playback.
If you press the û button, playback skips to the previous alarm image.
If you press the ù button, playback skips to the next alarm image.
start and at the end of each alarm recording. Use the ALARM skip
buttons to play back previous and subsequent alarm recordings.
24
1
2
3
English
Advertisement
Table of Contents
