Searching For Recorded Video; Alarm Search - Sanyo DSR-3506 Quick Manual

5

SEARCHING FOR RECORDED VIDEO

[SEARCH] button
[ALARM] buttons

Alarm search

Use the following procedure to search and playback all
video stored in the alarm recording area. If pre-alarm video
is being recorded, playback will start from immediately
before the alarm.
1
Press the [SEARCH] button while the
digital video recorder is recording or
stopped.
The SEARCH indicator lights up and the <SEARCH>
screen is displayed.
SEARCH
2
Turn the jog dial
SEARCH", and then turn the shuttle dial
clockwise.
The <ALARM SEARCH> screen is displayed.
This screen lists the eight most-recent alarm recordings.
English
Shuttle dial
Jog dial
to select "ALARM
(1) (2) (3) (4)
Images stored in the normal recording area, alarm
recording area or archive area can be located by searching
and can then be played back. See INSTRUCTION
MANUAL for searching the archive area.
Alarm recording
area
(1) NO:
Indicates the alarm number.
(2) DATE/TIME:
Indicates the date and time at which the alarm video
was recorded.
(3) CH:
Indicates the alarm video's channel (or camera number).
(4) TOTAL ALARMS:
Indicates the total number of alarm video recordings.
(5) Preview:
Displays the selected alarm video.
3
Turn the jog dial to move the cursor and
select the video for playback.
A preview of the selected alarm video is displayed in the
preview screen. In this case, the video from the instant of
alarm occurrence is displayed.
To display the next or previous recording
Turn the jog dial clockwise or counter-clockwise
accordingly.
To leave search mode
Press the [SEARCH] button. SEARCH indicator turns off.
4
Turn the shuttle dial clockwise.
The selected recording is played back in full screen mode.
(5)
To view pre-alarm video
After beginning playback of an alarm recording
identified by an alarm search, use the shuttle dial to
reverse playback.
11
Archive area
Normal
recording area
01-01-04 00:00:00 EN A ALARM 0000
02