Alarm Search - Sanyo VA-SW814 Instruction Manual

.  ' # ) A 9 # 8 # 5 9    ) $  D Q Q M   T V R ' ' ' ' ' '  ' '   
SEARCHING

Alarm Search

All alarm recordings made by the selected DVR are displayed in the alarm list in the "ALARM SEARCH"
window. This method of searching lets you select alarms to be played back from the alarm list.
3
4
5
1
Click (1) on the toolbar.
The "ALARM SEARCH" window will be
displayed.
2
Click the DVR to be searched in the
"TARGET" window (2) to select it, and
then click
Alternatively, double-click the desired DVR
in the "TARGET" window and click [Yes] in
the confirmation dialog box.
English
1
6
3
(3).
71
' ' '
(User Level: ID2 or higher)
Display the alarm list.
The alarm recordings will be displayed in
the alarm list window (4) in order starting
from the latest recordings.
If the specified DVR is a DSR-M804/M814,
you can click the tab index at the top of the
list to display a list for only the specified
channel (channel 1 to channel 4).
Display items:
•
NO.: Alarm number
•
DATE: Alarm recording date
•
TIME: Alarm recording time
•
CH: Alarm detection channel
The maximum number of alarm histories
that can be saved on a single hard disk is
as follows. If the number of alarm histories
exceeds the specified number, old alarms
are deleted from the list in the order they
occurred.
•
DSR-M810/M814: Max. 49,999 alarms
•
DSR-M804/M800: max. 19,999 alarms
2