Alarm Search - Sanyo DSR-5016P Quick Manual

5 SEARCHING FOR RECORDED VIDEO
5
Turn the jog dial to select the date, time
or minute and then turn the shuttle dial
clockwise.
The selected day (or hour or minutes) is indicated with a
yellow frame.
Alarm recording areas are indicated in red and areas with no
recordings in gray.
Reselecting the area cancels the original selected area.
To confirm normal recording
Press the [FUNC.] button to search for normal recording. A
blue mark is displayed at the top left of the screen, and
normally recorded parts are displayed in blue. (The search for
normal recording may take some time.)
To abort the search, turn the shuttle dial counter-clockwise.
If "MONTH" is selected in step 4 above, each frame
represents one day. If "WEEK" is selected, four frames
represent one day. If "DAY" is selected, each frame
represent one hour. If "HOUR" is selected, each frame
represents two minutes.
6
Turn the jog dial to select "SEARCH"
and then turn the shuttle dial clockwise.
"ALARM" flashes.
7
Turn the jog dial to select "ALARM" or
"THUMBNAIL" and then turn the shuttle
dial clockwise.
Now perform alarm search ( P.15) or alarm thumbnail search
( P.18).
English
< ALARM LOG SEARCH > TERM:DAY
01-01-05 00 06 12 18
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
SEARCH:ALARM
< ALARM LOG SEARCH > TERM:DAY
01-01-05 00 06 12 18
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
SEARCH:ALARM
[Settings] ( indicates default setting)
Setting
The <ALARM SEARCH> screen ( P.15)
ALARM is displayed and the search results are
displayed in a list.
The <ALARM THUMBNAIL SEARCH>
THUMBNAIL screen ( P.18) is displayed and the
search results are displayed in a list.

Alarm search

Use the following procedure to search and play back alarm
video. If pre-alarm video is being recorded, video from
immediately before the alarm can also be played back.
1
Press the [SEARCH] button while the
digital video recorder is recording or
stopped.
The SEARCH indicator lights up and the <SEARCH> screen
is displayed.
SEARCH
2
Turn the jog dial to select "ALARM
SEARCH" and then turn the shuttle dial
clockwise.
The <ALARM SEARCH> screen is displayed.
This screen lists the eight most recent alarm recordings.
(1) NO:
Indicates the alarm number.
(2) DATE/TIME:
Indicates the date and time at which the alarm video was
recorded.
(3) CH:
Indicates the alarm video's channel (or camera number).
(4) TOTAL ALARMS:
Indicates the total number of alarm video recordings.
(5) SEARCH:
Search by specifying an alarm number. ( P.16)
(6) CHANNEL:
Search by specifying a camera number. ( P.17)
(7) Preview:
Displays the selected alarm video.
15
Description
<SEARCH>
ALARM LOG SEARCH ->
ALARM SEARCH ->
ALARM THUMBNAIL SEARCH ->
TIME/DATE SEARCH ->
ARCHIVE AREA SEARCH ->
MOTION DETECTION SEARCH ->
MOVE:JOG SELECT:SHUTTLE
(1) (2) (3) (4)
< ALARM SEARCH >
NO DATE TIME CH TOTAL ALARMS :0000028
0000028 10-05 19:15 01 SEARCH :0000028
0000027 10-05 18:57 02 CHANNEL :
0000026 10-05 18:55 03
0000025 10-05 18:52 03
0000024 10-05 22:05 01
0000023 10-05 21:59 05
0000022 10-05 21:33 04
0000021 10-05 21:25 06
MOVE:JOG SELECT:SHUTTLE
(5)
(6)
(7)