Frymaster Gen III LOV Installation, Operation And Maintenance Manual page 59

DISPLAY
FILL VAT FROM BULK?
START FILLING?
PRESS AND HOLD
RELEASE BUTTON WHEN FULL
CONTINUE FILLING?
5.3.9 Oil Pan to Waste
Pan to waste selection is an option that allows bulk oil systems to pump excess oil in the pan to the bulk oil waste
tanks without draining the existing oil in the vat.
DISPLAY
3. Select LEFT VAT or RIGHT VAT for split vats.
4. Press the down arrow.
5. Select FILL VAT FROM BULK.
6. Press the √ (check) button to continue. If the X button is selected, the
controller goes to OFF.
7. Press and hold the button to fill the vat. The bulk oil refill pump uses a
momentary switch. It only pumps as long as the switch is depressed.
8. Release the button when the vat is filled to the lower fill line.
9. Press the √ (check) button to continue filling. Otherwise press the X
button once the vat is full to exit and return to OFF.
10. The controller switches off.
1. The fryer MUST be OFF.
2. Press the filtration menu button
3. Select LEFT VAT or RIGHT VAT for split vats.
4. Press the down arrow.
5-11
ACTION
ACTION