Frymaster Gen III LOV Installation, Operation And Maintenance Manual page 5

LOV-T™ ELECTRIC WARRANTY STATEMENT
Frymaster, L.L.C. makes the following limited warranties to the original purchaser only for this
equipment and replacement parts:
A. WARRANTY PROVISIONS - FRYERS
1. Frymaster L.L.C. warrants all components against defects in material and workmanship
for a period of two years.
2. All parts, with the exception of the frypot, O-rings and fuses, are warranted for two
years after installation date of fryer.
3. If any parts, except fuses and filter O-rings, become defective during the first two years
after installation date, Frymaster will also pay straight-time labor costs up to two hours
to replace the part, plus up to 100 miles/160 km of travel (50 miles/80 km each way).
B. WARRANTY PROVISIONS - FRYPOTS
The frypot has a lifetime parts and labor warranty.
installation, Frymaster will replace the frypot, allowing up to the maximum time per the
Frymaster time allowance chart hours of straight-time labor. Components attached to the
frypot, such as the high-limit, probe, gaskets, seals, and related fasteners, are also covered
by the lifetime warranty if replacement is necessitated by the frypot replacement. Leaks
due to abuse or from threaded fittings such as probes, sensors, high-limits, drain valves or
return piping are not included.
C. WARRANTY PROVISIONS – EASY TOUCH – TOUCH SCREEN CONTROLLER
Frymaster L.L.C. warrants the Easy Touch - Touch Screen Controllers against defective material or
workmanship for a period of three years parts and labor from the original installation date.
D. PARTS RETURN
All defective in-warranty parts must be returned to a Frymaster Authorized Servicer within
60 days for credit. After 60 days, no credit will be allowed.
E. WARRANTY EXCLUSIONS
This warranty does not cover equipment that has been damaged due to misuse, abuse,
alteration, or accident such as:
improper or unauthorized repair (including any frypot which is welded in the field);

failure to follow proper installation instructions and/or scheduled maintenance procedures

as prescribed in your MRC cards. Proof of scheduled maintenance is required to maintain
the warranty;
improper maintenance;

If a frypot develops a leak after
v