Frymaster Gen III LOV Installation, Operation And Maintenance Manual page 35

DISPLAY
14. Use the keypad to enter or edit the cook time in minutes and
seconds.
15. Press the √ (check) button.
16. Press the load compensation or sensitivity button.
17. Use the up and down arrows to change the load compensation
or sensitivity setting recommended for this product.
This setting allows the product compensation (sensitivity) to be
changed. Some menu items may need an adjustment,
depending on their cooking characteristics. NOTE: It is highly
recommended to NOT adjust this setting, as it could have
an adverse effect on the products cooking cycles.
The default setting for product compensation is set to four.
18. Press the √ (check) button.
19. Press the Quality Timer button.
20. Enter the time in minutes and seconds for the product hold
time.
21. Press the √ (check) button.
22. Press the Shake Timer 1 button.
23. Enter the time in minutes and seconds for the first shake to be
performed.
24. Press the √ (check) button.
25. Press the down arrow to scroll to more settings.
26. Press the Shake Timer 2 button if an additional shake is needed,
otherwise skip to step 30.
4-18
ACTION