Frymaster Gen III LOV Installation, Operation And Maintenance Manual page 27

DISPLAY
SETUP COMPLETE
□ OIL TYPE
OC01v01, OC02v02, etc.
SETUP COMPLETE
□ DISPLAY TYPE
NUMBER TEXT
SETUP COMPLETE
□ DISCARD NOW
TPM VALUE
SETUP COMPLETE
□ DISCARD SOON
TPM VALUE
47. Press the √ (check) button inside the SETUP COMPLETE box.
48. Press the Oil Type button.
49. Select the correct oil type curve. Press the down arrow button to
scroll to additional oil type curves. OC01vO1=F212,
OC02v02=MCSOL, OC12v02=F600
Ensure the oil type matches what the store is using.
50. Press the √ (check) button inside the SETUP COMPLETE box.
51. Press the Display Type button.
52. Select NUMBER or TEXT. NOTE: If set to NUMBER the Total Polar
Materials is shown as a number. If set to Text, only DISCARD
SOON/CONFIRM, OIL IS GOOD or DISCARD NOW is shown.
53. Press the √ (check) button inside the SETUP COMPLETE box.
54. Press the Discard Now button.
55. Press the number above TPM Value. Once the TPM (Total Polar
Materials) value of the oil is attained, the fryer will prompt to
discard the oil.
56. Use the keypad to enter the TPM discard now value.
57. Press the √ (check) button once the value is entered.
58. Press the √ (check) button to save the value.
59. Press the √ (check) button inside the SETUP COMPLETE box.
60. Press the down arrow button.
61. Press the Discard Soon button.
62. Press the number above Discard Soon TPM Value. This value is
typically chosen as a number below the TPM Discard Now value.
This value will display the Discard Soon message when the TPM
Discard Soon value is attained. This serves as a notice to the staff
that the oil will need to be discarded soon.
63. Use the keypad to enter the TPM discard soon value.
4-10
ACTION