Frymaster Gen III LOV Installation, Operation And Maintenance Manual page 55

DISPLAY
DISPOSE OIL?
INSERT DISPOSAL UNIT
IS DISPOSE UNIT IN PLACE?
DISPOSING
IS VAT EMPTY?
CLEAN VAT COMPLETE?
MANUALLY FILL VAT
5.3.5 Dispose for Bulk Oil Systems
This option is used to dispose of old oil into a bulk waste oil
system such as RTI. Bulk oil systems use a pump to move
exhausted oil from the fryer to a holding tank.
plumbing is used to connect the bulk oil systems to the fryers.
DISPLAY
4. Select DISPOSE OIL.
5. Press the √ (check) button to continue. If the X button is selected, the
user returns to the filtration menu.
Allow oil to cool to 100°F (38°C) before draining into an
appropriate METAL container for disposal.
6. Remove the filter pan and insert the disposal unit.
When draining oil into a disposal unit, do not fill above the
maximum fill line located on the container.
7. Ensure the PMSDU or a METAL container with a capacity of FOUR
gallons (15 liters) or larger is in place. Press the √ (check) button to
continue.
When draining oil into an appropriate METAL container, make
sure the container will hold at least FOUR gallons (15 liters) or
more, otherwise hot liquid could overflow and cause injury.
8. No action is required while the vat disposes the oil.
9. Once the vat is empty, press the √ (check) button to continue.
10. Clean the vat with a scrub brush and when complete press the √
(check) button to continue.
11. Carefully pour oil into the vat until it reaches the low-level fill line in
the fryer. Press the √ (check) button once the vat is full.
12. The controller switches off.
Ensure a filter pad is in place prior to draining
or disposing of oil. Failure to insert a filter
pad may result in clogged lines and/or pump.
Additional
1. The fryer MUST be OFF.
2. Press the filtration menu button
5-7
ACTION
DANGER
DANGER
DANGER
WARNING
ACTION