Table of Contents
Advertisement
Riello 7000
3 Product description
Riello 7000 solar storage tanks are specifically designed
for integration in central heating systems (not for DHW
use).
The most important technical features of these storage
tanks are:
- The tank and coils (Riello 7000.1000/S and 1500/S models
only) are specially designed and shaped for optimum
performance in terms of stratification, heat exchange
and replenishment times.
- Water fittings are available at different heights, permit-
ting different hot water generators to be used without
reducing the stratification effect.
- CFC-free polyurethane insulation and an elegant exter-
nal coating reduce heat loss and improve efficiency.
4 Identification
Riello 7000 solar storage tanks are identified by three plates. (On models Riello 7000.2000/F - 3000/F - 5000/F these
must be applied by the installer after the insulation has been fitted, see page 20).
- Data plate
This lists the technical specifications and performan-
ce of the product.
- Serial number plate
This specifies the serial number, model, consumption
and capacity.
Riello S.p.A.
Via degli Alpini 1
37045 Legnago (VR) - Italy
SOLAR STORAGE CYLINDER
ACCUMULO INERZIALE
Serial
Model
number
Code
Year of manufacture
Storage cylinder capacity
SOLAR STORAGE CYLINDER
Maximum absorbed power [Primary T = 80°C]
Serial
Model
number
Specific flow rate [ T 35°C]
Code
Maximum working pressure of coil
Year of manufacture
Storage cylinder capacity
Maximum working temperature of coil
Maximum absorbed power [Primary T = 80°C]
Maximum working pressure of cylinder
Specific flow rate [ T 35°C]
Maximum working temperature of cylinder
Heat loss
Maximum working pressure of coil
Maximum working temperature of coil
Electrical consumption
Maximum working pressure of cylinder
Power supply
Maximum working temperature of cylinder
Obligatory ground connection
Heat loss
Electrical consumption
Power supply
Obligatory ground connection
Serial
Maximum
number
absorbed power
Storage cylinder
Model
capacity
Riello S.p.A.
Via degli Alpini 1
37045 Legnago (VR) - Italy
Serial
Maximum
number
absorbed power
Storage cylinder
Model
capacity
If these plates or any other means of clearly identifying the product
are defaced, removed or lost, proper installation and servicing may be
rendered difficult.
- A flange is provided for easy cleaning and to allow an
extra heat exchanger to be added (Riello 7000.2000/F -
3000/F - 5000/F models only).
Riello 7000 storage tanks can be connected to a special
solar controller and can be integrated in solar heating sy-
stems in which Riello boilers or water heaters serve as au-
xiliary heat generators. A heat exchanger for installation
on the flange is available separately for the Riello 7000
.2000/F - 3000/F - 5000/F model.
- Product identification plate
This bears the name of the product.
l
kW
l/1'
bar
l
°C
kW
bar
l/1'
°C
bar
kW/24h
°C
W
bar
V-Hz
°C
kW/24h
W
V-Hz
kW
l
kW
l
4
Advertisement
Table of Contents
