Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Riello 7000 Series
Summary of Contents for Riello 7000 Series
- Page 1 Solar storage tanks 7000 EN INSTALLATION INSTRUCTIONS...
-
Page 2: Table Of Contents
Riello 7000 Dear Installer, Thank you for choosing a Riello 7000 solar storage tank. You have purchased a modern, quality product that is designed to give dependable and safe service and to provide comfort for many years to come. Arrange for the storage tank to be serviced regularly by an authorised Riello Technical Assistance Centre. -
Page 3: Safety Precautions
This Riello 7000 solar storage tank must only be used Never pull, disconnect, or twist the electrical cables for the purpose specified by Riello and for which it coming from the appliance even if it is disconnected is designed. -
Page 4: Product Description
4 Identification Riello 7000 solar storage tanks are identified by three plates. (On models Riello 7000.2000/F - 3000/F - 5000/F these must be applied by the installer after the insulation has been fitted, see page 20). -
Page 5: Design
1335 1310 1860 1770 1290 Riello 7000.2000/F - 3000/F - 5000/F models 1 - Soft polyurethane insulation (100 mm) 2 - Vent/outlet fitting (Ø 1"1/4F) 3 - Outlet/return fittings (Ø 1”1/2F) 4 - Probe wells (Ø 1/2"F) 7 - Tank... -
Page 6: Technical Specifications
(*) According to DIN 4708, to get domestic hot water with ΔT 20°C (80°/60°C) on the heat-exchanger, please observe the values showed in the datasheet concerning absorbed power and necessary capacity heat-exchanger. 7 Pressure drops COIL pressure drop (Riello 7000.1000/S -1500/S models only) STOR 1500 M Riello 7000.1500/S STOR 1000 M Riello 7000.1000/S... -
Page 7: Dimensions And Weight
Riello 7000 Heat exchanger coil KIT PRESSURE DROP (Riello 7000.2000/F - 3000/F - 5000/F models only) 8000 7500 7000 6500 6000 5500 5000 4500 4000 3500 3000 2500 2000 1500 1000 FLOW RATE (m 3 /h) PORTATA (m 8 Dimensions and weight Riello 7000.2000/F - 3000/F -... -
Page 8: Unpacking The Product
Riello 7000 9 Unpacking the product Riello 7000.1000/S e 1500/S solar storage tanks are deli- vered in a single package, protected by a plastic bag and Riello 7000.1000/S - 1500/S supported by a wooden pallet. Riello 7000.2000/F - 3000/F - 5000/F solar storage tanks... -
Page 9: Handling
Riello 7000.2000/F - 3000/F - 5000/F 11 Place of installation Riello 7000 solar storage tanks can be installed in any room where there is no specific requirement for an electrical protection rating higher than IP X0D. The room where the appliance is installed must, however, be dry to prevent the formation of rust. -
Page 10: Fitting The Insulation
Riello 7000 13 Fitting the insulation (Riello 7000.2000/F - 3000/F - 5000/F) Once the storage tank is correctly positioned inside the room where it is to be installed, proceed to fit the insula- tion and the accessories to complete the tank. -
Page 11: Preparing For Initial Start-Up
Scheduled maintenance is essential for the safety, efficiency and long working life of your solar storage tank. Proper maintenance also reduces energy consumption and ensures reliability over time. Have your storage tank serviced either by a Riello Technical Assistance Centre or by a qualified professional at least once a year. Perform the following operations before beginning any maintenance. - Page 12 RIELLO S.p.A. 37045 Legnago (VR) Tel. 0442630111 - Fax 044222378 - www.riello.it The manufacturer strives to continuously improve all products. Appearance, dimensions, technical specifications, standard equipment and accessories are therefore liable to modification without notice.