Commissioning At The Sinamics S/G Converter Using The Aop30 - Siemens SIMOTICS FD 1MH1 Operating Instructions & Installation Instructions

Start-up
7.10 Setting the motor parameters at the converter
7.10.2

Commissioning at the SINAMICS S/G converter using the AOP30

In the AOP30, navigate as follows:
● Navigate within the selection fields using <F2> and <F3>.
● In the entry fields, you can either directly enter the required value or select it from a list.
● Activate the selection with <F5>.
116
SIMOTICS FD 1MH1
Operating Instructions 08/2017