Table of Contents
Advertisement
Spare parts
10.1
Ordering data
When ordering spare parts, in addition to the precise designation of the spare part, specify the
motor type and the serial number of the motor. Ensure that the spare part designation matches
the designation in the spare part lists and add the associated part number.
Example
● Bearing shield, drive end (Part 5.00)
● Machine type 1MH1
● Serial number D21234567010001
The machine type and the serial number are indicated on the rating plate and in the technical
data, and are also embossed on the drive end of the shaft.
Note
The graphical representations in this chapter show schematic diagrams of the basic versions.
They are used for spare parts definitions. The supplied version may differ in details from these
representations.
Risk of explosion
If you use parts other than the original spare parts, the type of protection can no longer be
guaranteed. This can result in an explosion during operation in a potentially explosive
gaseous atmosphere. This can result in death, serious injury or material damage.
● Use only original spare parts for explosion-proof machines; this also applies to
● Commercially available equivalent standard parts such as screws may be used.
10.2
Ordering spare parts via the Internet
You can use "Spares on Web" to determine the order numbers for motor spare parts quickly
and easily.
Spares on Web (https://www.automation.siemens.com/sow).
A short description of how to use "Spares on Web" is available on the Internet.
Guide for Spares on Web (http://support.automation.siemens.com/WW/news/en/25248626).
SIMOTICS FD 1MH1
Operating Instructions 08/2017
WARNING
components such as seals, terminals, cables and cable entries. Should you have any
questions, please contact the Service Center (Page 177).
10
155
Advertisement
Table of Contents
