Teamviewer Installation - Furuno WR-2100 Installation Manual

7. TeamViewer installation

1. Download the software of TeamViewer Host (For remote server) from the following web site:
https://www.teamviewer.com/ja/download/dyngate.aspx#version9
2. Double click "TeamViewer_Host_Setup.exe" to install the software.
(1) Double click the icon
(3) Select "company / commercial use",
and then click [Next]
(5) Make password and computer name
Password: rmsrms (enter this password)
Computer name: Enter location's name
and then click [Exit]
3. After installed software, please inform "Your ID" to the headquarter of Furuno who is in charge.
4. Use other DPU to confirm remote access by TeamViewer.
(Remote control management tool)
(2) Click [Next]
(4) Check on "License Agreement", and
then click [Next]
(6) "Your ID" will be issued automatically.
(* Remember this ID)
And then click [OK]
30
SSE-14-0023_17
123 456 789