System Configuration - Furuno WR-2100 Installation Manual

System Configuration

The observation system consists of an Antenna Unit (Radome), a Signal Processing Unit (storage
box) , and a Display Unit (indoor unit) are shown below.
(1) Antenna Unit (radome)
The antenna, stored in the radome, turns to radiate the radio waves.
The radiated waves are backscattered by precipitation particles on the propagation path, return to
the antenna, and are processed by RF converter to transfer the signals to the Signal Processing
Unit .
(2) Signal Processing Unit (storage box)
Signal Processing Unit is stored in the storage box, and processes received signals digitally.
The digitally-processed signals are transferred to the Display Unit via 1000Base-T (LAN) .
(3) Display Unit (indoor unit)
To display and record the weather observation data.
Consumer must prepare the external storage device for recording the weather observation data if
necessary.
Note: The distance between entrance of ATU and SPU must be less than 3.5m if using 5m cables.
(1) ATU
F U R U N O
Cables need 1m of
extra length inside
ATU for connecting to
inside devises
Indoor
）
LAN cable
AC cable
AC / Dsub cable
Existing LAN /
Inter net / Modem
LAN
adapter
Signal cable
LAN cable
AC cable
(3) DPU
USB cable
* All equipment except DPU in the indoor is option.
vi
SSE-14-0023_17
(2) SPU
Cables need 0.5m of
extra length inside SPU
for connecting to inside
devises
AC100-240
AC100-240
External data
storage device
AC100-24
0
UPS
USB cable
AC100-24
0