Antenna Unit - Furuno WR-2100 Installation Manual

5.2. Antenna Unit (Radome)
Cable tie
If using Panasonic DMW2028B
1. Remove buffer material and cable tie.
After received radar by shipping, open
radome to remove the buffer material and
cable tie.
Buffer material
2. Remove PF connector from inside and
attach it from outside bottom.
If using Mirai FPK-28F
3. Set the bottom of radome to the stand.
1) Adjust the cable introduction of under
2) To fit the bottom of radome with five
3) To fix 5 pcs of M12x40 Hex Bolts to join
Bottom of
radome
18
radome to notch of the stand.
salient into the stand hole
the stand and radome.
SSE-14-0023_17