Program Forced Account And Authorisation Codes - Samsung DCS-408 System Administration Manual

Samsung
DCS-408 & 408i
Program Forced Account and Authorisation
Codes
[MMC 305]
The use of account and authorisation codes can be optional or forced. By program-
ming a station to use forced codes, the station user must enter the required code be-
fore a call can be made.
Options are:
0 NONE
1 AUTHORISE CODE
2 ACCOUNT CODE
Program Keys
VOLUME UP & DOWN - Used to scroll through options
KEYPAD - Used to select options.
SOFT KEYS - Move cursor left and right.
SPEAKER - Used to store data and advance to next program.
ANS/RLS - Used to select ALL stations
ACTION
1. Open customer programming and select
2. Dial the station number (e.g., 25)
OR
Press UP or DOWN to select the entry number and press
the right soft key to move the cursor
OR
Press ANS/RLS to select all stations
3. Dial the feature option, 0–2 (e.g. 2)
OR
Press UP or DOWN to select and press the right soft key
4. Press TRSF to store and exit programming
OR
Press SPEAKER to store and advance to next MMC
System Administration Guide
DISPLAY
[21] FORCD CODE
305
NONE
[25] FORCD CODE
NONE
[ALL] FORCD CODE
?
[25] FORCD CODE
ACCOUNT CODE
29
November 2001
OR