Samsung DCS-408 System Administration Manual page 33

Samsung
DCS-408 & 408i
ACTION
1. Open customer programming and select
2. Dial the station number (e.g., 25)
OR
Press UP or DOWN to scroll through the station numbers
and press the right soft key to move the cursor
3. Enter the key number (e.g., 18)
OR
Press UP and DOWN to scroll through the keys and use the
right soft key to move the cursor
OR
Press the key to be programmed
4. Enter the extender (see table above) and the system displays
your selection.
5. Select another key
OR
If there are no more entries for this station, press the left soft
key to return to step 2
OR
Press TRSF to store and exit programming
OR
Press SPEAKER to store and advance to next MMC
System Administration Guide
DISPLAY
107
[21] EXT EXTEND
01 : DT71 ➔
[25] EXT EXTEND
01 : DT71 ➔
[25] EXT EXTEND
18 : DS ➔ DS_
[25] EXT EXTEND
18 : DS27 ➔
26
November 2001