Samsung DCS-408 System Administration Manual page 21

Samsung
DCS-408 & 408i
Procedure for Entering Names
Names are written using the number keys. Each press of a key selects a character, as
shown on the selected key. Pressing a different key moves the cursor to the right. For
example, you want to enter the name "SAM SMITH." The first letter "S" is selected by
pressing the dial key number 7 four times (i.e. the first key press selects "P", the sec-
ond selects "Q", and so on). Now press the number 2. This moves the cursor and se-
lects the letter "A." Continue selecting characters from the keypad to complete your
message.
Tip: When the character you want next appears on the same key as the character you have just
entered (e.g. you typed "P" and now want to type "R"), press the UP key to move the cursor to
the right, then select the next character.
The # key is used to select the following special characters (in sequence of key presses):
# space & ! :
) _ + { }
? . , % $ -
→ → → →
| ; " `
14
System Administration Guide
November 2001
< > / = [ ] @ ^ (