Volume Set - Planar VM55LX-X User Manual

15.3 Volume Set

This command can set the volume level for speaker and audio out, individually.
Bytes Bytes Description
DATA[0] 0x44 = Volume- Set
DATA[1] Volume
Audio Out Volume
DATA[2]
Level
Example: Set the Display Volume to 77% (0x4D) (Display Address 01)
Monitor
Header Category
ID
0xA6 0x01 0x00
VM Series Displays RS232 User Guide
020-1359-00A
Bits
Command requests the display to set the
specified volume parameters.
0 to 100 (%) of the user selectable range of the
display.
0 to 100 (%) of the user selectable range of the
display.
Code0 Code1 Length Data Control Data[0] Data[1]
0x00 0x00 0x04
Description
0x01 0x44 0x4D
Audio
Data[1] Checksum
0x4D 0xE7
Page | 28