Video; Video Parameters; Video Parameters Get; Video Parameters Report - Planar VM55LX-X User Manual

Video

13. Video Parameters

Use the following commands to get/set video parameters as defined below.

13.1 Video Parameters Get

Bytes
0x33 = Video Parameters-
DATA[0]
Get
Example: (Display Address 01)
Header Monitor ID
0xA6 0x01

13.2 Video Parameters Report

Bytes
0x33 = Video Parameters-
DATA[0]
Report
DATA[1] Brightness
DATA[2] Color
DATA[3] Contrast
DATA[4] Sharpness
DATA[5] Tint (Hue)
DATA[6] Black Level
DATA[7] Gamma Selection
Example: Video parameters are set to 55 % (0x37) and Gamma Curve is set to 2.2 (Display Address 01)
Monitor
Header Category
ID
0x21 0x01 0x00
VM Series Displays RS232 User Guide
020-1359-00A
Bytes Description
Category Code0
0x00 0x00
Bytes Description
Data
Page Length Data[0]
Control
0x00 0x0A 0x01 0x33
Bits
Command requests the display to report its
current video parameters.
Code1 Length Data Control
0x00 0x03 0x01
Bits
Command reports to the host controller the
current video parameters of the display.
0 to 100 (%) of the user selectable range of the
display
0 to 100 (%) of the user selectable range of the
display
0 to 100 (%) of the user selectable range of the
display
0 to 100 (%) of the user selectable range of the
display
0 to 100 (%) of the user selectable range of the
display
0 to 100 (%) of the user selectable range of the
display
0x01= Native, 0x02 = S gamma, 0x03 = 2.2,
0x04 = 2.4
0x05 = D-image(DICOM gamma)
Data[1] Data[2] Data[3]
0x37 0x37 0x37
Description
Data[0] Checksum
0x33 0x96
Description
Data[4] Data[5] Data[6]
0x37 0x37 0x37
Data[7] Checksum
0x03 0x1B
Page | 20