Swapping A Call Between Two Terminals In The Same Association - Mitel MiVoice 6920 User Manual

During a call
On the second, idle terminal
Menu/Ident
Recover parking
On the same terminal:
Menu/Ident
Recover parking

Swapping a call between two terminals in the same association

Your subscription has several associated terminals: one fixed terminal and one DECT ter-
minal, for instance. In this example, you wish to resume on the DECT terminal a call
already set up on the fixed terminal
# 7 0
* Depending on the programming performed by the system operator
other terminal or if the correspondent ends the call.
(A6xxxi series):
1 - Press the system Menu key.
2 - Press to display
validate.
3 - Dial the number of the terminal on which you have selected
the Parking function then click
-> Communication with your correspondent has been restored.
Note: if an external call on hold is not resumed within a given
time, it is routed to the operator. An internal call is released.
Via feature code:
Recovering a parked call: # 7 0 + extension number
If you change your mind and wish to recover the call on the
terminal where it has been parked:
1 - Press the system Menu key.
2 - Press to display
confirm.
-> Communication with your correspondent has been restored.
Via feature code:
Recovering a parked call: # 7 0 + extension number
1 - From the terminal of the association on which you wish to
resume the call (the DECT terminal in our example), enter the
code # 7 0 or
-> A confirmation message is transmitted.
2 - On the first terminal, release the call by hanging up or by
pressing the End key.
-> The call is now set up on the second terminal.
Recover parking
Recover parking
.
- 14 -
and press Enter
OK to confirm.
then press Enter
to
to
*