Around the toner cartridge
Note
The fuser area is hot. Take care when removing paper from the
printer.
Open the front cover and pull the toner cartridge out.
1
Remove the jammed paper by gently pulling it straight out.
2
Replace the toner cartridge and close the front cover. Printing
3
automatically resumes.
In the paper exit area
Open and close the front cover. The jammed paper is automatically
1
ejected from the printer.
Gently pull the paper out of the output tray.
2
If you do not see the jammed paper or if there is any resistance
when you pull, stop and go to the next step.
Open the rear cover.
3
If you see the jammed paper, push the pressure lever on each side
4
down and remove the paper. Return the pressure lever to its
original position and skip the step 10.
1
If you still do not see the paper, go to the next step.
9.3
<Troubleshooting>
pressure lever
1