Paper Menu; System Setup Menu - Samsung ML-3470 User Manual

Paper menu

Use the Paper menu to define all settings relating to print material input
and output, as well as the specific print material you are using with your
printer.
Item
Set the default number of copies by selecting any
Copies
number from 1 to 999.
Select the paper size currently loaded in the tray.
Paper Size
Select the paper type currently loaded in the tray.
Paper Type
Using this item, you can set which tray you want to
Paper
use.
Source
• If you select
determine the source.
• Select MP Tray or Manual Tray to use the multi-
purpose tray. If you select Manual Tray, you
need to press OK each time you print a page.
• Tray 2 is available only when an optional tray 2 is
installed.
When you select any other value except
Tray
Chaining
Paper Source
printer automatically prints from other trays.
If this menu item is set to Off, the printer does not
work until you insert paper into the specified tray.
Graphic menu
Use the Graphic menu to change settings affecting the quality of the
printed characters and images.
Item
Specify the number of dots printed per inch (dpi).
Resolution
The higher the setting, the sharper printed
characters and graphics.
• If your print jobs are mostly text, select
for the highest quality printing.
Normal
• Select
1200dpi-Best
bitmapped images, such as scanned photos or
some graphics, that will benefit from enhanced
line screening.
You can lighten or darken the print on the page by
Darkness
changing the toner density setting. The
setting usually produces the best result. Use the
toner density setting to save toner.
Light
This item enhances the print quality.
Image
Enhance
• : Doesn't enhance the quality.
Normal
•
Text Enhance
figures.
Explanation
, the printer can automatically
Auto
Auto
and the selected tray is empty, the
Explanation
600dpi-
when your job contains
Normal
: Enhances letters and simple

System Setup menu

Use the System Setup menu to configure a variety of printer features.
Item
Language
Power Save
Auto
Continue
from
Altitude Adj.
Auto CR
Job Timeout
2.3
<System setup>
Explanation
This setting determines the language of the text
that appears on the control panel display and
information printing.
When the printer does not receive data for an
extended period of time, power consumption is
automatically lowered. You can set how long the
printer waits before going to power save mode.
This item determines whether or not the printer
continues printing when it detects the paper
unmatched to your paper setting.
• Off: If a paper mismatch occurs, the message
will remain on the display and the printer will
wait until you insert the correct paper.
• On: If a paper mismatch occurs, an error
message will display. The printer will wait for 20
seconds, then automatically clear the message
and continue printing.
You can optimize print quality according to your
altitude.
This item allows you to append the required
carriage return to each line feed.
Refer to the following samples:
AA AA
BB BB
CC CC
LF LF+CR
You can set the length of time the printer waits
before printing the last page of a print job that
does not end with a command to print the page.
When a print time-out occurs, the printer prints the
page in the print buffer.