Samsung ML-3470 User Manual page 49

Message Meaning
A problem has
LSU Motor Error
occurred in the LSU
Cycle Power
(Laser Scanning
Unit).
There is a problem
Main Motor
in the main motor.
Locked
There is a problem
Open Heat Error
in the fuser unit.
Cycle Power
There is a problem
Over Heat Error
in the fuser unit.
Cycle Power
Paper has jammed
Paper Jam 0
in the feeding area
Open/Close Door
of the tray.
Paper has jammed
Paper Jam 1
in the fuser area.
Open/Close Door
Paper has jammed
Paper Jam 2
in the paper exit
Check Inside
area.
The printer is
printing jobs using
Printing...
the displayed
language.
The printer is on-line
Ready
and ready to printer.
The LSU(Laser
Self Diagnostic
Scanning Unit) in
LSU
your printer is
checking some
problems detected.
The engine in your
Self Diagnostic
printer is checking
Temperature
some problems
detected.
The printer is on
Sleeping...
power save mode.
Suggested solutions
Unplug the power
cord and plug it back
inches. If the
problem persists,
please call for
service.
Open and then close
the front cover.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Clear the jam. See
page 9.1 and
page 9.1.
Clear the jam. See
page 9.3.
Clear the jam. See
page 9.3.
Complete your
printing.
Use your printer.
Please wait a few
minutes.
Please wait a few
minutes.
When data is
received, it switches
to on-line
automatically.
9.7
Message
There is no paper in
Tray 1
the tray 1.
Paper Empty
There is no paper in
Tray 2
the optional tray 2.
Paper Empty
<Troubleshooting>
Meaning Suggested solutions
Load paper in the
tray 1. See page 5.5.
Load paper in the
optional tray 2. See
page 5.5.