DSC PowerSeries Neo LE2080 Installation Manual page 3

WARNING: Installer please read carefully
Note to Installers
The warningson this page contain vitalinformation. Asthe only individualin contact
with systemusers, it isthe installer'sresponsibilityto bring each itemin thiswarning to
the attention of allusersof thissystem.
System Failures
Thissystemhasbeen carefullydesigned to be aseffective aspossible. There are cir-
cumstances, however, involving fire, burglary, or other typesof emergencieswhere
it may not provide protection. Any alarm system of any type may be compromised
deliberately or may fail to operate as expected for a variety of reasons. Some, but
not all, of the reasonsmaybe:
Access by Intruders
Intruders may enter through an unprotected access point, circumvent a sensing
device, evade detection by moving through an area of insufficient coverage, dis-
connect a warning device, or interfere with or prevent the proper operation of the
system.
Component Failure
Although every effort has been made to make this system as reliable as possible,
the systemmayfailto function asintended due to the failure of a component.
Compromise of Radio Frequency (Wireless) Devices
Signals may not reach the receiver under all circumstances which could include
metalobjects placed on or near the radio path or deliberate jamming or other inad-
vertent radio signalinterference.
Criminal Knowledge
This systemcontains security features which were known to be effective at the time
of manufacture. It is possible for persons with criminalintent to develop techniques
which reduce the effectiveness of these features. It is important that the security
systembe reviewed periodicallyto ensure that itsfeaturesremain effective and that
it is updated or replaced if it is found that it does not provide the protection expec-
ted.
Failure of Replaceable Batteries
This system's wireless transmitters have been designed to provide several years of
battery life under normal conditions. The expected battery life is a function of the
device environment, usage, and type. Ambient conditions such as high humidity,
high or low temperatures, or large temperature fluctuations may reduce the expec-
ted batterylife. While each transmitting device hasa low batterymonitor which iden-
tifies when the batteries need to be replaced, this monitor may fail to operate as
expected. Regular testing and maintenance will keep the system in good oper-
ating condition.
Inadequate Installation
A security system must be installed properly in order to provide adequate pro-
tection. Every installation should be evaluated by a security professional to ensure
that all access points and areas are covered. Locks and latches on windows and
doors must be secure and operate as intended. Windows, doors, walls, ceilings
and other building materials must be of sufficient strength and construction to
provide the level of protection expected. A reevaluation must be done during and
after any construction activity. An evaluation by the fire and/or police department is
highlyrecommended if thisservice isavailable.
Inadequate Testing
Most problems that would prevent an alarmsystemfromoperating as intended can
be found by regular testing and maintenance. The complete system should be
tested weekly and immediately after a break-in, an attempted break-in, a fire, a
storm, an earthquake, an accident, or any kind of construction activity inside or out-
side the premises. The testing should include all sensing devices, keypads, con-
soles, alarm indicating devices, and any other operational devices that are part of
the system.
Insufficient Time
There may be circumstances when the system will operate as intended, yet the
occupants willnot be protected froman emergency due to their inability to respond
to the warnings in a timely manner. If the system is remotely monitored, the
response maynot occur in time to protect the occupantsor their belongings.
Motion Detectors
Motion detectors can only detect motion within the designated areas as shown in
their respective installation instructions. They cannot discriminate between
intruders and intended occupants. Motion detectors do not provide volumetric
area protection. They have multiple beams of detection and motion can only be
detected in unobstructed areas covered by these beams. They cannot detect
motion which occurs behind walls, ceilings, floor, closed doors, glass partitions,
glassdoorsor windows. Anytype of tampering whether intentionalor unintentional
such as masking, painting, or spraying of any material on the lenses, mirrors, win-
dowsor anyother part of the detection systemwillimpair itsproper operation.
Passive infrared motion detectors operate by sensing changes in temperature.
However their effectiveness can be reduced when the ambient temperature rises
near or above body temperature or if there are intentionalor unintentionalsources
of heat in or near the detection area. Some of these heat sources could be heat-
ers, radiators, stoves, barbecues, fireplaces, sunlight, steam vents, lighting and so
on.
Power Failure
Controlunits, intrusion detectors, smoke detectorsand manyother securitydevices
require an adequate power supply for proper operation. If a device operates from
batteries, it is possible for the batteries to fail. Even if the batteries have not failed,
they must be charged, in good condition and installed correctly. If a device oper-
atesonlybyAC power, anyinterruption, however brief, willrender that device inop-
erative while it does not have power. Power interruptions of any length are often
accompanied by voltage fluctuations which may damage electronic equipment
such asa securitysystem. After a power interruption hasoccurred, immediatelycon-
duct a complete systemtest to ensure that the systemoperatesasintended.
Security and Insurance
Regardless of its capabilities, an alarm system is not a substitute for property or life
insurance. An alarm system also is not a substitute for property owners, renters, or
other occupants to act prudently to prevent or minimize the harmful effects of an
emergencysituation.
Smoke Detectors
Smoke detectorsthat are a part of thissystemmaynot properlyalert occupantsof a
fire for a number of reasons, some of which follow. The smoke detectors may have
been improperlyinstalled or positioned. Smoke maynot be able to reach the smoke
detectors, such as when the fire is in a chimney, walls or roofs, or on the other side
of closed doors. Smoke detectors may not detect smoke fromfires on another level
of the residence or building.
Every fire is different in the amount of smoke produced and the rate of burning.
Smoke detectors cannot sense all types of fires equally well. Smoke detectors may
not provide timely warning of fires caused by carelessness or safety hazards such
assmoking in bed, violent explosions, escaping gas, improper storage of flammable
materials, overloaded electricalcircuits, children playing with matches, or arson.
Even if the smoke detector operates as intended, there may be circumstances
when there is insufficient warning to allow all occupants to escape in time to avoid
injuryor death.
Telephone Lines
If telephone lines are used to transmit alarms, they may be out of service or busy for
certain periodsof time. Also an intruder maycut the telephone line or defeat itsoper-
ation bymore sophisticated meanswhich maybe difficult to detect.
Warning Devices
Warning devices such as sirens, bells, horns, or strobes may not warn people or
waken someone sleeping if there is an intervening wall or door. If warning devices
are located on a different level of the residence or premise, then it is less likely that
the occupants will be alerted or awakened. Audible warning devices may be
interfered with by other noise sources such as stereos, radios, televisions, air con-
ditioners, other appliances, or passing traffic. Audible warning devices, however
loud, maynot be heard bya hearing-impaired person.
3