Download Print this page

Philips PT927CC User Manual page 8

Hide thumbs Also See for PT927CC:

Advertisement

English
8
- The shaver, the Jet Clean System (PT927CC), the
charging stand (PT927) and the other accessories
are not dishwasher-proof.
- Water may leak from the socket at the bottom
of the shaver when you rinse it. This is normal
and not dangerous because all electronics are
enclosed in a sealed power unit inside the shaver.
- Do not use the shaver, Jet Clean System
(PT927CC), adapter, charging stand (PT927) or
any other part if it is damaged, as this may cause
injury. Always replace a damaged adapter, charging
stand or part with one of the original type.
- Use, charge and store the shaver and the Jet
Clean System (PT927CC) at a temperature
between 10°C and 35°C.
- Always place and use the shaver and the Jet Clean
System (PT927CC) on a surface that is fluid-resistant.
- Only use the adapter, charging stand (PT927)
and accessories supplied.
- Always put the protection cap on the shaver to
prevent damage and to avoid dirt accumulation in
the shaving heads.
Jet Clean (PT927CC only)
- Only use the Jet Clean System with the original Jet
Clean solution (HQ200).
- Always place the Jet Clean System on a stable,
level and horizontal surface to prevent leakage.
- The Jet Clean System thoroughly cleans but does
not disinfect your shaver, therefore do not share
the shaver with others.
- If the shaver and the Jet Clean System
are subjected to a major change in temperature,
pressure or humidity, let them acclimatise for
30 minutes before you use them.

Advertisement

loading

This manual is also suitable for:

Pt927Pt878Pt877