Advertisement
English
28
Problem
PT927CC:
The Jet Clean
System does
not work when
I press the
on/off button.
Possible cause
You have used
another cleaning
fluid than the original
Philips cleaning fluid.
You have not closed
the locking lever of
the Jet Clean System
properly, or you have
not placed the shaver
in the Jet Clean
Shaver properly. In
these cases the Jet
Clean System starts
to operate, but the
cleaning program
is not performed
properly.
The Jet Clean System
is not connected to
the mains.
Solution
Only use Jet Clean solution
HQ200.
Place the shaver without
protection cap in the Jet
Clean System properly.
Close the locking lever
properly.
Put the small plug in the Jet
Clean System and put the
adapter in the wall socket.
Advertisement
