Advertisement
Problem
The shaver does
not work when
I press the
on/off button.
PT927CC: The
shaver is not
entirely clean
after I clean it
in the Jet Clean
System.
Possible cause
The rechargeable
battery is empty.
The temperature
of the shaver is too
high. In this case,
the shaver does not
work.
The cleaning fluid in
the cleaning chamber
is soiled.
The cleaning fluid
level is too low. If the
fluid volume in the
cleaning chamber
drops below the
minimum level during
the cleaning program,
the program aborts.
The cleaning symbol
and the 'fluid low'
symbol flash at
intervals and the
holder returns to its
starting position.
English
Solution
Recharge the battery
(see chapter 'Charging')
or connect the shaver to
the mains.
As soon as the temperature
of the shaver has dropped
sufficiently, you can switch
on the shaver again.
Empty and rinse the
cleaning chamber (see
section 'Cleaning the shaving
unit in the Jet Clean System'
in chapter 'Cleaning and
maintenance').
Refill the cleaning chamber
with cleaning fluid up to
the MAX level (see section
'Cleaning the shaving unit
in the Jet Clean System'
in chapter 'Cleaning and
maintenance').
27
Advertisement
