Advertisement
English
26
Problem
The shaver does
not shave as well
as it used to.
Troubleshooting
This chapter summarises the most common
problems you could encounter with the appliance.
If you are unable to solve the problem with the
information below, contact the Consumer Care
Centre in your country.
Possible cause
The Jet Clean System
(PT927CC only)
has not cleaned the
shaver properly
because the cleaning
fluid in the cleaning
chamber is soiled
or the cleaning fluid
level is too low.
The shaving heads
are damaged or
worn.
Long hairs obstruct
the shaving heads.
You have not
inserted the shaving
heads properly.
Solution
Clean the shaver thoroughly
before you continue shaving.
If necessary, clean and
refill the cleaning chamber
(see chapter 'Cleaning and
maintenance').
Replace the shaving heads
(see chapter 'Replacement').
Clean the shaving heads
one by one (see section
'Cleaning the shaving unit
with the cleaning brush'
in chapter 'Cleaning and
maintenance').
Make sure that the
projections of the shaving
heads fit exactly into the
recesses (see section
'Cleaning the shaving unit
with the cleaning brush').
Advertisement
