Advertisement
English
16
- Clean the inside and outside of the shaving guard
with the brush.
6
Put the shaving heads back into the shaving
unit.
Note: Make sure that the projections of the shaving
heads fit exactly into the recesses.
7
Put the retaining frame back into the shaving
unit (A) and turn the lock clockwise (B).
8
Insert the lug of the shaving unit into the slot
in the top of the shaver. Then close the shaving
unit.
Note: If the shaving unit does not close smoothly, check
if you have inserted the shaving heads properly and if
the retaining frame is locked.
Advertisement
