Advertisement
Charging in the charging stand (PT927 only)
1
Put the small plug in the charging stand.
2
Put the adapter in the wall socket.
3
Place the shaver in the charging stand.
, The battery symbol shows the charging status
of the shaver (see section 'Charge indications' in
this chapter).
Charging in the Jet Clean system
(PT927CC only)
1
Put the small plug in the Jet Clean System.
2
Put the adapter in the wall socket.
3
Place the shaver without protection cap upside
down in the shaver holder.
Note: The shaver cannot be placed in the Jet Clean
System when the protection cap is on the shaving unit.
4
Push down the locking lever completely to lock
the shaver into place.
, The battery symbol on the Jet Clean System
flashes to indicate that the shaver is being
charged.
Note: When the Jet Clean System is performing the
cleaning program, the battery symbol is out.
, When the battery is fully charged, the battery
symbol on the Jet Clean System lights up
continuously.
Note: After approx. 30 minutes, the battery symbol
goes out to save energy.
English
11
Advertisement
