English introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Please read this user manual, as it contains information about the wonderful features of this shaver as well as some tips to make shaving easier and more enjoyable.
Page 4
English Children should be supervised to ensure that they do not play with the shaver and the Jet Clean System. Always unplug the shaver before you clean it under the tap. Caution Never immerse the shaver in water. Never immerse the Jet Clean System or the charging stand in water nor rinse it under the tap.
When you charge the shaver for the first time or after a long period of disuse, let it charge until the white battery lights up continuously. A fully charged shaver provides up to 60 (PT927CC/PT927/ PT925/PT923/ PT923CC/PT920) or 50 shaving minutes (PT877/PT876/PT875/PT870).
Note: After approx. 30 minutes, the battery light goes out to save energy. Charging with the adapter Do not charge the shaver in a closed pouch (PT927CC/PT927/PT925/ PT923CC/PT923/PT920/PT877 only). Put the small plug in the shaver. Put the adapter in the wall socket.
Press the on/off button once to switch on the shaver. Move the shaving heads over your skin. Make circular movements. Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. Press the on/off button once to switch off the shaver.
Clean the shaver after every shave for optimal shaving performance. Regular cleaning guarantees better shaving performance. For the best cleaning results, we advise you to use the Philips Cleaning spray (HQ110) and (PT927CC/PT923CC only) the Jet Clean solution (HQ200).
English Cleaning the shaving unit under the tap Switch off the shaver and disconnect it from the mains. Press the release button to open the shaving unit. Rinse the shaving unit and hair chamber under a hot tap for 30 seconds. Be careful with hot water.
Page 10
English Turn the lock anticlockwise (A) and remove the retaining frame (B). Remove and clean one shaving head at a time. Each shaving head consists of a cutter and a guard. Note: Do not clean more than one cutter and guard at a time, since they are all matching sets.
English Insert the lug of the shaving unit into the slot in the top of the shaver. Then close the shaving unit. Note: If the shaving unit does not close smoothly, check if you have inserted the shaving heads properly and if the retaining frame is locked. Cleaning the shaving unit in the Jet Clean system (PT927CC/ PT923CC only) The Jet Clean System cleans the shaving unit.
English Put the small plug in the Jet Clean System and put the adapter in the wall socket. The shaver holder automatically moves to its highest position. The Jet Clean System is now ready for use. Using the Jet Clean system Place the shaver without protection cap upside down in the shaver holder.
Page 13
English Cleaning the Jet Clean system Empty the cleaning chamber and clean it thoroughly by rinsing it with hot tap water every 15 days if you use the Jet Clean System daily. Otherwise empty and clean the cleaning chamber at least once a month. Clean the outside of the Jet Clean System with a moist cloth.
The shaving head symbol will light up to indicate that the shaving heads need to be replaced. Replace damaged shaving heads right away. Only replace the shaving heads with original HQ9 Philips Shaving Heads (PT927CC/PT927/PT925/PT923CC/PT923/PT920) or HQ8 Philips Shaving Heads (PT877/PT876/PT875/PT870).
Page 15
English Switch off the shaver. Disconnect the shaver from the mains and remove it from the Jet Clean System (PT927CC/PT923CC). Press the release button to open the shaving unit. Pull the shaving unit off the shaver. Turn the lock anticlockwise (A) and remove the retaining frame (B). Remove the shaving heads and place new ones in the shaving unit.
If you have trouble removing the battery, you can also take the appliance to a Philips service centre. The staff of this centre will remove the battery for you and will dispose of it in an environmentally safe way.
Do not connect the shaver to the mains again after you have removed the rechargeable battery. guarantee and support If you need information or support, please visit www.philips.com/ support or read the worldwide guarantee leaflet. guarantee restrictions The shaving heads (cutters and guards) are not covered by the terms of the international guarantee because they are subject to wear.
Page 18
You have used another cleaning fluid Only use Jet Clean solution HQ200. than the original Philips cleaning fluid. You have not closed the locking lever Place the shaver without protection cap in of the Jet Clean System properly, or the Jet Clean System properly.