Maintenance & Care - Bissell CROSSWAVE PET 2225F SERIES User Manual

Using the Rinse and Storage Tray
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
1
Place unit on Rinse and
Storage Tray.
4
Turn the machine ON by
pressing the Hard Floor
button.
7
Pull Brush Roll out by grabbing the
Brush Roll tab and pulling upward.
2
Fill Rinse Cup with water.
5
Recline the machine while
in storage tray. Allow the
machine to run for 10-15
seconds until all water is
picked up. Repeat as needed.
8
Place the Brush Roll upright in the Brush Roll
Drying Tray to dry.
3
Pour water into Rinse Funnel
to fill the MAX line of the
Rinse and Storage Tray.
6
Grasp Brush Window at the
front of the window and
pull upward to remove.
www.BISSELL.com
9