Bissell CROSSWAVE PET 2225F SERIES User Manual page 10

Using the Rinse and Storage Tray (cont.)
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
9
10
Machine Storage
Put the unit away in a closet or basement until the next use. Store
in a protected, dry area. Since this product uses water, it must not
be stored where there is a danger of freezing. Freezing will damage
internal components and may void the guarantee.
NOTE: Any solution remaining in the Clean Water Tank should be emptied prior
to machine storage.
10
www.BISSELL.com
Replace Brush Roll by inserting the
Brush Roll end into the right side of
the foot. Then lock the pull tab into
place by pressing downward.
Replace the Brush Window by first
lining up the Brush Window tabs with
the edges of the foot. Then press the
window back into place until you hear
a click.